涂装车间节水方案企划与实施

某涂装车间在现有节水措施的基础上，通过企划与实施一系列新的技术及精益管理措施，如，磷化出槽喷淋工艺优化、纯水制水率提升、空调冷凝水回用率提升、中水深度处理回用、用水分级管理等，将新鲜水用量从 15. 2 L/m2降至 11. 3 L/m2，达到涂装行业清洁生产评价指标体系（ 2016版）中的 I级标准 12 L/m²要求，处于国内领先水平。     

Multi-objective layout optimization for an orbital propellant depot

Structural and Multidisciplinary Optimization - The overall layout optimization design of an orbital propellant depot involves the optimization of shape, size, and positions of propellant tanks in...     

基于神经网络的实物保护系统综合效能评估研究

目前国内外核设施实物保护系统大多采用路径分析法进行有效性评价,通过计算截住概率来衡量系统的优劣,评估指标单一,未能精确反映系统可靠性、指挥策略、信息安全设计等因素对系统性能的影响。为全面分析实物保护系统综合效能,从影响系统效能因素集出发,采用层次分析法(Analytic Hierarchy Process,AHP)建立实物保护系统综合效能评估指标体系,同时借助BP(Back Propagation)神经网络的非线性复合能力,建立核设施实物保护系统综合效能评估模型,完成了海洋核动力平台实物保护系统综合效能评估。评估结果表明:该BP神经网络评估模型收敛迅速,避免了AHP评估过程中不能满足多数样本集中效应的缺点,且具有较好的自适应性、稳定性,为实物保护效能评估领域提供了一种全新思路。     

VUV photoluminescence properties of KSrPO4:Dy3+ phosphor

White-light-emitting phosphors based on phosphate host matrix, KSrPO_4 doped with Dy~(3+), were prepared by solid state reaction and their VUV luminescent properties were firstly investigated. The excitation band peaking at 125-153 nm corresponding to the absorption of PO_4~(3-) group exhibits very strong absorption. The phosphors emit warm-white luminescence under vacuum ultraviolet excitation of 147 nm, which consists of three main emission peaks located at 475, 570 and 662 nm, respectively.According to the luminescence and color chromaticity of the optimal sample KSrPO_4:1 mol%Dy~(3+),1.3 mol%Li~+, it can be a potential candidate for mercury-free fluorescent lamps.     

Discrimination the geographical origin of Yanchi Tan Lamb with different muscle sections by stable isotopic ratios and elemental profiles

In the study, lamb, feed and soil samples were collected from three regions of China in the year 2017 and 2018. The δ¹³C and δ¹⁵N values in lamb (defatted dry mass and lipids) and grass and the contents of nine elements in lamb, grass and soil were determined. The results indicated that except for Fe, Zn and Rb, most variables of lamb showed significant differences among two or three regions, and the contents of Fe, Sr and Cs showed significant differences between two years, and the contents of Cu and Zn showed significant differences among different muscle sections. Besides, significant correlations were found for δ¹³C between defatted lamb and lipid (r² = 0.973, P < 0.05) and for the element contents between lamb and soil. Finally, four key variables δ¹³C, δ¹⁵N, Sr and Mo were selected through stepwise canonical discriminant analysis with the cross-validation correct classification rate of 99.1%.     

柔性化夹具静动态特性分析及拓扑优化

针对汽车发动机缸盖、变速箱阀体全自动化混合生产线,设计柔性化夹具来满足CNC高精密加工以及快速换产的要求。建立夹具系统三维模型,并利用ANSYS对夹具系统在不同加工工况载荷下进行静态性能分析;从分析结果判断出影响夹具性能的关键结构,并对其进行拓扑优化设计,实现夹具整体减重39.25 kg。然后对改进后夹具模型进行验证分析,发现最大变形量减少为0.0045199 mm,满足设计指标0.005 mm;最后,对现有夹具系统进行模态实验和CAE模态分析,发现夹具系统在Z向受到低频激振力时,容易发生共振,该频段为70 Hz?110 Hz,在加工过程中需要控制刀具加工频率避免发生共振。     

Physicochemical characteristics,antioxidant capacity and thermodynamic properties of purple-fleshed potatos dried by radio frequency energy

Abstract

The impacts of using radio frequency (RF) energy to dry purple-fleshed potatoes were investigated and compared to infrared radiation (IR) and microwave (MW) drying techniques. The gelatinization rate, color, flavor, morphological, and structural characteristics, thermodynamic properties, as well as antioxidant capacity were examined. The results indicated that the drying time of RF (70?min) and MW (21?min) were shorter than IR (105?min). The gelatinization ratio of MW, RF, and IR were 94.4?±?2.0, 88.3?±?1.4, and 64.5?±?1.1%, respectively. The degree of crystallization of purple-fleshed potato powder decreased with all three drying methods. RF-dried potatoes were able to retain higher polyphenols (loss rate: 4.3%), total anthocyanin (3.7%), and total flavonoid content (35.1%), whereas IR showed the lowest retention. The content of polyphenols also decreased significantly. Furthermore, after RF heating, the scavenging of free radicals was higher compared to MW and IR.     

基于卡滞响应的翼面偏转自动切换技术

为了验证水陆两栖飞机结构对CCAR-25-R4部25.305,25.307条款要求的符合性,要求当全机加载到限制载荷时,需要在规定时间内一次性获取活动翼面的最大正负偏角。针对此问题,提出了基于卡滞响应的翼面偏转自动切换技术,并将该方法应用于大型灭火/水上救援水陆两栖飞机稳定俯仰2.5 g工况限制载荷静力试验中,顺利完成了试验。试验结果表明,该方法是可行和有效的,同时为后续试验提供技术支撑。     

OMS-2催化剂成型工艺研究及其在印染废水处理中的应用

以OMS-2粉体催化剂为基础,对催化剂进行挤出成型,考察粘结剂种类、粘结剂用量、润滑剂和孔结构改进剂用量、焙烧温度对成型催化剂机械强度的影响。得到最佳成型工艺条件为,粘结剂硅溶胶用量为OMS-2粉体催化剂质量的105%～110%、辅助粘结剂纳米ZrO_2用量为OMS-2粉体催化剂质量的30%～35%、润滑剂田菁粉用量为OMS-2粉体催化剂质量的2. 5%～3. 0%、孔结构改进剂柠檬酸用量为OMS-2粉体催化剂质量的5%～6%,焙烧温度450℃。成型后催化剂机械强度可达150 N·cm~(-1),满足工业化应用对催化剂强度的要求。将成型催化剂应用于催化湿式氧化印染废水处理,经过432 h活性评价时间,COD平均去除率约91. 6%,反应结束后催化剂结构完整,平均机械强度约144 N·cm~(-1),表现出良好的水热稳定性。